Man Using Measuring Tape in Factory Setting

“We are delighted with the product that has been manufactured with such high level of accuracy and surface finish.”

Nick Bateman

Founding Director, Driving Passion Manufacturing Ltd

Manufacturing support from prototype to production

APH3G supports manufacturers with vacuum formed parts, GRP mouldings, RIM/PU components, CNC machining and jigs and fixtures, all under one roof in Benfleet, Essex. With decades of experience supplying OEMs in the automotive, aerospace, rail and defence sectors, we help you get parts right first time.

One supplier, every process

Keeping design, tooling, moulding, machining, painting and inspection in-house means shorter lead times, consistent quality and a single point of contact for your project. We work from your CAD data or samples and can advise on the materials and tooling that suit your production volumes.

  • Vacuum forming and GRP moulding

  • RIM/PU moulding and CNC machining

  • Jigs, fixtures and CMM inspection

Short runs to thousands of parts

We cater for prototype one-offs and short runs through to production quantities of many thousands.

Quality you can verify

ISO 9001:2015 accreditation and full CMM inspection reports give you confidence that every part meets specification.

Looking for a reliable manufacturing partner? Tell us about your next project.

frequently asked questions

Vacuum forming is a process where a sheet of plastic is heated until it is pliable, then drawn tightly over a mould using a vacuum. Once cooled, the part is removed, trimmed and finished. It is a cost-effective way to produce strong, lightweight parts, from one-off prototypes to production runs of many thousands.
We work with all vacuum formable materials, from HIPS and ABS through to acrylic capped ABS, PETG, polycarbonate and fire retardant grades, in thicknesses from 0.25mm up to 10mm. Many of our aerospace, defence, rail and automotive customers need specialist materials, and we can advise on the right choice for your application.
GRP (glass reinforced plastic), often called fibreglass, is made by laying glass fibre reinforcement and resin into a mould. It produces strong, lightweight and durable parts and is ideal for large or complex shapes, bespoke one-offs and low volume production. We make our own patterns, plugs and moulds in-house.
RIM (reaction injection moulding) uses a low pressure system to produce polyurethane (PU) components. Because the tooling costs far less than injection moulding tools, it is a cost-effective choice for prototypes and relatively low volume production, such as medical equipment housings and automotive interior and exterior panels.
Yes. Our patterns and moulds are made in-house, either on our CNC machines or by our time-served pattern makers, using materials such as MDF, melamine, Ureol tooling board and epoxy tooling board. Depending on the job, we can produce low cost tooling for prototypes or production tooling for longer runs.
We produce everything from one-off prototypes and short runs through to production quantities of many thousands, and we will recommend the process and tooling that best suit your volumes and budget.

get a free quote